SEC Single Fused Connector Kit

SEC Single Fused Connector Kit

Click here for a printable PDF version of this page
Model SEC 1791-SF

 

For Copper or Aluminum Stranded Wire

Fused quick disconnect type kit low voltage copper or aluminum conductor cables. Recommended for street, highway, and flood lighting in outdoor locations in both wet or dry areas. The Model SEC 1791-SF kits are designed to fit most conductors from number 12 to 4 stranded wire. Conductors are attached with simple screw lugs for easy, quick installation. Conductor can be removed and reinstalled. Any standard midget, ferrule type fuse (except glass tube) may be used in this connector kit. Fuse dimensions are 13/32” diameter by 1-1/2” length SEC fused connectors are designed for 600 volts or less. Maximum fuse rating for this unit 30 AMP.
SEC Single Fuse Connector Kit

SEC Single Fuse Connector Kit

Parts Lists
SEC 1791-SF Single Fused Kit Complete
SEC 1791-DS-3 Load Fuse Body
SEC 1791-DS-4 Load and Line Fuse Holder
(2 per Kit)
SEC 1791-SF-6 Line Fuse Body

Listed Single Fused Connector Kit 9D70

Required Torque Inch Pounds

CAT NO. WIRE SIZE WIRE TYPE WIRE DIA
RANGE (IN)
CUTTING
RANGE NO.
TORQUE
(IN-LBS)
1791-DS-3 8 RHH, RHW-2, THW, TW, USE-2, XHHW 15/64 1 60
1791-DS-4 6 RHH, RHW-2, THHN, THW, THWN, USE-2, XHHW-2 19/64 1 60
1791-DS-6 4 THHN, THW, THWN 5/16 1 60
4 RHH, RHW-2, USE-2, XHHW-2 23/64 2 60

Ordering Instructions

The same fused connector kit will fit most conductor sizes from number 12 to 4 stranded or solid

 

Patent No. 3,874,760