SEC Single Pin Connector Kit
For Copper or Aluminum Stranded Wire
Click here for a printable PDF version of this page | |||||||||||||||
Model SEC 1791-SP
|
|||||||||||||||
Pin type quick disconnect type kit low voltage copper or aluminum conductor cables. Recommended for street, highway, and flood lighting in outdoor locations in both wet or dry areas. Model SEC 1791-SP kits are designed to fit most conductors from number 12 to 4 stranded wire. Conductors are attached with simple screw lugs for easy, quick installation. Conductor can be removed and reinstalled. SEC pin kits are designed for 600 volts or less. | |||||||||||||||
|
|||||||||||||||
|
Required Torque Inch Pounds
CAT NO. | WIRE SIZE | WIRE TYPE | WIRE DIA RANGE (IN) |
CUTTING RANGE NO. |
TORQUE (IN-LBS) |
SEC | 8 | RHH, RHW-2, THW, TW, USE-2, XHHW | 15/64 | 1 | 60 |
1791-DS-3 | 6 | RHH, RHW-2, THHN, THW, THWN, USE-2, XHHW-2 | 19/64 | 1 | 60 |
1791-DPS-1 | 4 | THHN, THW, THWN | 5/16 | 1 | 60 |
1791-SF-6 | 4 | RHH, RHW-2, USE-2, XHHW-2 | 23/64 | 2 | 60 |
Ordering Instructions
The same pin kit will fit most conductor sizes from number 12 to 4 stranded both line and load.
Patent No. 3,874,760