SEC Double Pin Connector KIt

SEC Double Pin Connector KIt

Click here for a printable PDF version of this page

Model SEC 1791-DP

 

For Copper or Aluminum Stranded Wire

Pin quick disconnected type kit for low voltage copper aluminum conductor cables. Recommended for street, highway, and flood lighting in outdoor locations in both in wet or dry areas. Model SEC 1791-DP kits were specially designed to pin a complete circuit. SEC pin kits are designed to splice up to four conductors from number 10 to 2/0 stranded on the line side and from number 12 to 4 stranded on the load side. Conductors can be removed and reinstalled. SEC pin kits are designed for 600 volts or less.

SEC Double Pin Connector KIt

SEC Double Pin Connector KIt

Parts Lists
SEC 1791-DP Double Pin Kit Complete
SEC 0791-1 Splice Box Body
SEC 1791-DF-1 Double Pin Splice Box Cap
SEC 1791-DP-1 Cap Pin Unit (2 per Kit)
SEC 1791-DS-3 Load Pin Body (2 per Kit)
SEC 1791-DSP-1 Load Pin Unit (2 per Kit)
SEC 1791-DF-5 Connector Lug Assembly (2 per Kit)

Listed Double Pin
Connector Kit
9D70

Required Torque Inch Pounds

CAT NO. WIRE SIZE WIRE TYPE WIRE DIA
RANGE (IN)
CUTTING
RANGE NO.
TORQUE
(IN-LBS)
SEC 1791-DF-5, 0791-1 8 RHH, RHW-2, THW, TW, USE-2, XHHW 15/64 1 100
6 RHH, RHW-2, THHN, THW, THWN, USE-2, XHHW-2 19/64 1 115
4 THHN, THW, THWN 5/16 1 115
4 RHH, RHW-2, USE-2, XHHW-2 23/64 2 115
3 THHN, THWN 11/32 2 120
3 THW 3/8 2 120
2 RHH, RHW-2, THHN, THW, THWN, USE-2, XHHW-2 13/32 2 120
CAT NO. WIRE SIZE WIRE TYPE WIRE DIA
RANGE (IN)
CUTTING
RANGE NO.
TORQUE
(IN-LBS)
SEC 1791-DF-5, 0791-1 1 THWN, THHN, XHHW-2 7/16 2 120
1 USE-2, RHW, RHH, THW 31/64 3 120
1/0 USE-2, RHW-2, RHH, THWN, THNN, THW, XHHW-2 17/32 3 120
2/0 USE-2, RHW-2, RHH, THWN, THNN, THW, XHHW-2 37/64 3 120
SEC 17911-DS-4 1791-DS-3 8 RHH, RHW-2, THW, TW, USE-2, XHHW 15/64 1 60
6 RHH, RHW-2, THHN, THW, THWN, USE-2, XHHW-2 19/64 1 60
4 THHN, THW, THWN 5/16 1 60
4 RHH, RHW-2, USE-2, XHHW-2 23/64 2 60

Ordering Instructions

The same kit will fit most conductor sizes from number 10 to 2/0 on line side and number 12 to 4 on load side either copper or aluminum, stranded. One kit will splice four conductors on line side and provide double pins for load side.

 

Patent No. 3,874,760